Home - Kuipment locator

FEATURED EQUIPMENT

2024 Bobcat T66 Compact Track Loader
$69,995.00

**Hours 991**

**Factory Bobcat Warranty Until September 28/2027 2000 Hours**

**Emission Warranty Until September 28/2029 Or 3000 Hours**

**Cab**

**Heater**

**Air Conditioning**

**2 Speed**

**Air Suspension Seat**

**5 LINK UNDERCARRIAGE SUSPENSION**

**LED Front And Rear Lighting**

**Rear Weight Package**

**Back Up Camera**

**Back Up Alarm**

**Radio**

**LED Beacon Light**

**Block Heater**

**Selectable ISO Or H Pattern Controls**

**Auxiliary Hydraulics With Case Drain**

Just Changed Engine Oil And Filter (5W40 Full Synthetic) Planetary Oils (Full Synthetic) Primary And Secondary Cab Filters, Inner And Outer Air Filters, Fuel Filter, Hydraulic Fan Filter, Main Hydraulic Filter And Greased Unit

**C/w Choice Of Tooth Or Construction Bucket**

The Bobcat T66 is a compact track loader with a 74 hp turbocharged diesel engine, a rated operating capacity of 2,450 lbs, and an operating weight of approximately 8,840 to 8,927 lbs. Key specifications also include a tipping load of 7,000 lbs, a standard travel speed of 7.2 mph (10.2 mph with two-speed option), and an auxiliary hydraulic flow of 17.6 gallons per minute.

$1,591.93/month OAC

**Financing Available**

2024 Bobcat T66 Compact Track Loader
$69,995.00

**Hours 991**

**Factory Bobcat Warranty Until September 28/2027 2000 Hours**

**Emission Warranty Until September 28/2029 Or 3000 Hours**

**Cab**

**Heater**

**Air Conditioning**

**2 Speed**

**Air Suspension Seat**

**5 LINK UNDERCARRIAGE SUSPENSION**

**LED Front And Rear Lighting**

**Rear Weight Package**

**Back Up Camera**

**Back Up Alarm**

**Radio**

**LED Beacon Light**

**Block Heater**

**Selectable ISO Or H Pattern Controls**

**Auxiliary Hydraulics With Case Drain**

Just Changed Engine Oil And Filter (5W40 Full Synthetic) Planetary Oils (Full Synthetic) Primary And Secondary Cab Filters, Inner And Outer Air Filters, Fuel Filter, Hydraulic Fan Filter, Main Hydraulic Filter And Greased Unit

**C/w Choice Of Tooth Or Construction Bucket**

The Bobcat T66 is a compact track loader with a 74 hp turbocharged diesel engine, a rated operating capacity of 2,450 lbs, and an operating weight of approximately 8,840 to 8,927 lbs. Key specifications also include a tipping load of 7,000 lbs, a standard travel speed of 7.2 mph (10.2 mph with two-speed option), and an auxiliary hydraulic flow of 17.6 gallons per minute.

$1,591.93/month OAC

**Financing Available**

2013 John Deere TX Turf Gator
$9,995.00

**860 Hours**

**Gas Pedal Start And Stop**

**Kawasaki Gas Engine**

**CVT Transmission**

**Rear Receiver Hitch**

**Electric Box Lift**

**Spray In Box Liner**

**Steel Canopy With Roof**

**Glass Windshield**

**Turf Tires**

**Clean Unit New Seats**

**Excellent Lake Runabout**

The John Deere TX Turf Gator has a 10.1 kW (13.5 hp), 400 cc gas engine, a CVT transmission, and a 272 kg (600 lb) cargo box capacity. It features a 454 kg (1000 lb) towing capacity, independent front suspension, and a solid-axle rear suspension, with a 18.9 L (5 US gal) fuel tank. It is a two-wheel drive (4×2) vehicle with a speed of up to 25 km/h (15.5 mph).

$239.68/month OAC

**Financing Available**

2013 John Deere TX Turf Gator
$9,995.00

**860 Hours**

**Gas Pedal Start And Stop**

**Kawasaki Gas Engine**

**CVT Transmission**

**Rear Receiver Hitch**

**Electric Box Lift**

**Spray In Box Liner**

**Steel Canopy With Roof**

**Glass Windshield**

**Turf Tires**

**Clean Unit New Seats**

**Excellent Lake Runabout**

The John Deere TX Turf Gator has a 10.1 kW (13.5 hp), 400 cc gas engine, a CVT transmission, and a 272 kg (600 lb) cargo box capacity. It features a 454 kg (1000 lb) towing capacity, independent front suspension, and a solid-axle rear suspension, with a 18.9 L (5 US gal) fuel tank. It is a two-wheel drive (4×2) vehicle with a speed of up to 25 km/h (15.5 mph).

$239.68/month OAC

**Financing Available**

2021 CASE TR310B Skidsteer
$59,900.00

2021 1841 Hours Cab, Heat, Air, Hydraulic Quick attach, High Flow, Bluetooth Radio, Ride Control, Air Ride Heated Seat, Self Level, Back up Camera, ZigZag 15 inch Tracks. Unit comes fully serviced with synthetic oils, and new filters. Very clean, well maintained high flow unit. 74″ smooth edge bucket included in price.

$1,362.33/month OAC

**Financing Available**

2021 CASE TR310B Skidsteer
$59,900.00

2021 1841 Hours Cab, Heat, Air, Hydraulic Quick attach, High Flow, Bluetooth Radio, Ride Control, Air Ride Heated Seat, Self Level, Back up Camera, ZigZag 15 inch Tracks. Unit comes fully serviced with synthetic oils, and new filters. Very clean, well maintained high flow unit. 74″ smooth edge bucket included in price.

$1,362.33/month OAC

**Financing Available**

FEATURED ATTACHMENTS

New Never Installed Gentec Brand Hydraulic Thumb

$1,995.00

Ideal For Machines 10,000 To 15,000 Pounds

Weld On Plate

Hydraulic Cylinder

Compare New At $2,793.00

One Available For $1,995.00

Built-Tough

Introducing the HT1035 Hydraulic Weld-On Thumb by Gentec – built tough for contractors and landscapers. This 10″ wide and 35″ long thumb is designed for machines between 10,000lbs and 15,000lbs and weighs 187lbs. Constructed with 5/8″ thick AR400 Steel Tines in a ladder frame layout and reinforced with gussets, our HT1035 thumb is designed for increased strength and long-lasting durability. The double-sealed welded cylinder enhances reliability, ensuring your work remains uninterrupted. Both cylinder pins and the thumb main pin are greaseable, making maintenance a breeze.

Superior Geometry

Experience superior geometry with the HT1035. The thumb boasts a maximum extension angle of 140 degrees, outperforming the competition. Designed to minimize stowed dimensions, when fully retracted, the tines only extend 13″ away from the edge of the excavator stick – meaning it won’t get in your way when digging. The backplate measures 40”, and the hydraulic cylinder is included.

Maximize Your Investment

Invest in the HT1035 to maximize the capabilities of your excavator and get the job done faster and more efficiently. With 35 years of experience and a strong commitment to our company values, Gentec has become a trusted choice for more than 50,000 satisfied clients. As a family-owned business, we take pride in our products and prioritize your satisfaction. Choose the HT1035 Hydraulic Weld-On Thumb for a lasting investment that will make a difference in your projects for years to come.

Features:

10” wide, 35” long hydraulic thumb

Ideal for machines between 10,000lbs and 15,000lbs

5/8” thick AR400 Steel Tines assembled in a ladder frame layout and with gussets

Double-sealed welded cylinder for increased reliability

Thumb geometry designed to mechanically prevent cylinder lock-out when retracted

Maximum extension angle of 140 degrees

Minimized stowed dimensions for optimal digging performance

Greaseable pins for easy maintenance

40” backplate

Hydraulic cylinder included

1-year warranty

Replacement parts available

$53.71/month OAC

Financing Available

2024 Bobcat T66 Compact Track Loader

2013 John Deere TX Turf Gator

2021 CASE TR310B Skidsteer

New Never Installed Gentec Brand Hydraulic Thumb

Dirt Trax Skid Steer Sander / spreader

Dirt Trax Wheel Loader Pallet Forks And Frame SOLD SOLD SOLD

New Never Used Kage 96 Inch Snow Blade, Quick Attach Box Combo

New Captok ASV Mini Mount Land Plane

Sign Up for Hot Deals