2017 CAT 259 D Skid Steer

Additional Information

1700 Hours
Comes with cab, heat, Backup Camera, Air, 2 speed, Air ride heated seat, polydoor,
Hydraulic quick attach, bluetooth Radio, Ride control, Self Level 66 inch smooth edge bucket, new camoplast zigzag tracks supplied.
Fully serviced one owner unit i premium condition
$74,900.00

Specifications
Engine
Engine Make
DIT

Engine Model
Cat C3.3B

Gross Power
74.3hp

Net Power
73.2hp

Peak Torque
195.5lb ft

Torque Measured @
1500rpm

Displacement
203cu in

Bore
3.7in

Stroke
4.7in

Net Power – Iso 9249
73.9hp

Gross Power – Sae J1995
74.3hp

Engine Model
Cat C3.3B DIT (turbo)

Net Power – Sae 1349
73.2hp

Peak Torque – 1,500 Rpm – Sae J1995
195lb ft

Operational
Operating Weight
8847.2lb

Cooling System Fluid Capacity
3.7gal

Fuel Capacity
27.8gal

Engine Oil Capacity
3gal

Hydraulic System Fluid Capacity
13.3gal

Operating Voltage
12V

Alternator Supplied Amperage
80amps

Max Speed – Low Range
6mph

Max Speed – High Range
8.6mph

Power Train
Travel Speed – Forward Or Reverse – One Speed
5.9mph

Travel Speed – Forward Or Reverse – Two Speed
8.5mph

Loader
Breakout Force
5035.4lb

Tipping Load
5800.4lb

Operating Load
2899.1lb

Weights
Operating Weight
8945lb

Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Operating Weight – 320 Mm/12.6 In Tracks
8846lb

Operating Weight – 400 Mm/15.7 In Tracks
8945lb

Hydraulic
Pump Flow
20.1gal/min

Relief Valve Pressure
3335.9psi

Hydraulic System
Hydraulic Flow – Standard – Loader Hydraulic Pressure
3335 psi

Hydraulic Flow – Standard – Loader Hydraulic Flow
20 gal/min

Hydraulic Flow – Standard – Hydraulic Power (Calculated)
39hp

Hydraulic Flow – High Flow – Hydraulic Power (Calculated)
58hp

Hydraulic Flow – High Flow – Loader Hydraulic Pressure
3335 psi

Hydraulic Flow – High Flow – Loader Hydraulic Flow
30 gal/min

Operating Specifications
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Rated Operating Capacities – 50% Tipping Load
2900lb

Rated Operating Capacities – 35% Tipping Load
2030lb

Rated Operating Capacity With Optional Counterweight
3100lb

Tipping Load
5800lb

Breakout Force – Tilt Cylinder
5035lb

Ground Contact Area – With 400 Mm/15.7 In Track
1848in2

Ground Pressure – With 400 Mm/15.7 In Track
4.8 psi

Ground Contact Area – With 320 Mm/12.6 In Track
1483in2

Ground Pressure – With 320 Mm/12.6 In Track
6 psi

Service Refill Capacities
Cooling System
3.7gal

Fuel Tank
27.7gal

Hydraulic Tank
10.3gal

Engine Crankcase
3gal

Hydraulic System
13.2gal

Cab
Rops
ISO 3471:2008

Fops
ISO 3449:2005 Level I

Fops Level Ii
ISO 3449:2005 Level II

Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Inside Cab**
83 dB(A)

Outside Cab***
103 dB(A)