This standard hydraulic angle broom for loaders is the ideal rotary broom for any application. From snow, dirt, debris and grass this is the perfect solution for clearing and cleaning.
Hydraulically driven rotary angle broom.
Hydraulic swing capable of 30° left or right of center
Storage stands for simple mounting, dis-mounting, and storage
Spring system to dampen transportation bounce
Mounted with Skid Steer Quick Attach with easy entry steps
14 Pin Electrical Connector
Sweeping Width
84 Inch
Brush Diameter:
32″
Core Diameter:
10″
Broom Speed:
up to 200 RPM, dependent on prime mover
Drive:
Hydraulic
Min. Hydraulic Flow:
12 GPM (Single Standard Motor)
Max. Hydraulic Flow:
20 GPM (Single Standard Motor)
Mounting:
Mounted with Skid Steer Quick Attach with easy entry steps
The Lowe CLH750 Classic auger drive has a weight of 306 pounds, an output shaft of 2″ hex, and a suggested hydraulic flow of 8 to 20 GPM (36 to 76 LPM), according to skidsteerattachmentspensacola.com. The maximum PSI is 3,300 PSI, and it can handle augers up to 24″ in diameter. The RPM at 8 GPM is 64, and the torque at 3,000 PSI is 1,118 lb/ft
60-inch, side-discharge, finish mower with a multi-gauge .22 inch (56 mm) deck construction at the spindle mount
. It features a single-lever quick-select for cutting height adjustment, with a range of 1.5 to 3.75 inches (3.8-10 cm) and 10 cutting positions. The deck is suspended by two front tires and a full-width rear roller.
Key Specs:
Cutting Width: 60 inches (152 cm)
Number of Blades: 3, 20 1/2 inch (52 cm) low lift
Cutting Height Range: 1.5 to 3.75 inches (3.8-10 cm)
Cutting Positions: 10
Deck Construction: Multi-Gauge .22 inch (56 mm) at spindle mount
Deck Suspension: 2 front tires with full width rear roller
Discharge: Side
Flip-Up Deck: Yes, with spring tension downward
Cutting Height Adjustment: Single lever quick select
Additional Features:
The deck can be tilted near vertical for cleaning and servicing by removing two pins.
The mower is designed to float over terrain with its full width rear roller and wide pneumatic front swivel tires.
The LM600 is compatible with Ventrac 3000, 3100, 3200, and 3400 series tractors.
The LM600 is designed for a professional, manicured lawn look.
