SOLD

2019 Caterpillar 246D Skidsteer Loader SOLD SOLD SOLD

$51,995.00

2270 Hours
Cab
Heater
Air Conditioning
2 Speed
ISO Pilot Controls
Hydraulic Quick Attach
Air Ride Suspension Seat
Heated Seat
Backup Camera
Front And Rear Work Lights
Front Wiper
Back Up Alarm
Self Levelling
Auxiliary Hydraulics With Case Drain
14 Pin Auxiliary Electrical Connector
Rear Weight Package
 
Just Changed Engine Oil And Filter (5W40 Full Synthetic) Inner And Outer Engine Air Filter, Primary And Secondary Cab Filters, Fuel Filter, Hydraulic Filter And Greased Unit.
 
C/w Construction Bucket

 

Financing Available
$1,195.26/month OAC

SOLD

Specifications

Make

Caterpillar

Model

242D Skidsteer Loader

Year

2019

Hours

2270

Heater

Yes

Air conditioning

Yes

Additional Information

2270 Hours
Cab
Heater
Air Conditioning
2 Speed
ISO Pilot Controls
Hydraulic Quick Attach
Air Ride Suspension Seat
Heated Seat
Backup Camera
Front And Rear Work Lights
Front Wiper
Back Up Alarm
Self Levelling
Auxiliary Hydraulics With Case Drain
14 Pin Auxiliary Electrical Connector
Rear Weight Package
 
Just Changed Engine Oil And Filter (5W40 Full Synthetic) Inner And Outer Engine Air Filter, Primary And Secondary Cab Filters, Fuel Filter, Hydraulic Filter And Greased Unit.
 
C/w Construction Bucket
 
$51,995.00
 

Dimensions

Dimensions

E

Ground Clearance

0.73ft in

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Bucket Pin Height – Carry Position

7.9in

Bucket Pin Height – Maximum Lift

10.1ft in

Bucket Pin Reach – Maximum Lift

7.2in

Bumper Overhang – Behind Rear Axle

40.21in

Clearance At Maximum Lift And Dump

90in

Departure Angle

27 degrees

Wheel Base

3.63ft in

Reach – Maximum Lift/Dump

21.7in

Turning Radius From Center – Bucket

83in

Turning Radius From Center – Coupler

51.8in

Turning Radius From Center – Machine Rear

64.5in

Vehicle Width Over Tires

66in

Height – Top Of Cab

6.93ft in

Length – With Bucket On Ground

137.31in

Length – Without Bucket

108.9in

Maximum Dump Angle

52 degrees

Maximum Overall Height

154.2in

Maximum Reach – With Arms Parallel To Ground

49.2in

Rack Back Angle – Maximum Height

87 degrees

Operating Specifications

Breakout Force – Tilt Cylinder

5034lb

Rated Operating Capacity With Optional Counterweight

2350lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Tipping Load

4300lb

Rated Operating Capacity

2150lb


Specifications

Engine

Displacement

203cu in

Bore

3.7in

Stroke

4.7in

Net Power – Iso 9249

73.9hp

Gross Power – Sae J1995

74.3hp

Engine Model

Cat C3.3B DIT (turbo)

Net Power – Sae 1349

73.2hp

Peak Torque – 1,500 Rpm – Sae J1995

195lb ft

Net Flywheel Power

73.2hp

Power Train

Travel Speed – Forward Or Reverse – One Speed

7.5mph

Travel Speed – Forward Or Reverse – Two Speed Option

11.5mph

Weights

Operating Weight

6980 lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Hydraulic System

Hydraulic Flow – Standard – Loader Hydraulic Pressure

3335 psi

Hydraulic Flow – Standard – Loader Hydraulic Flow

20 gal/min

Hydraulic Flow – Standard – Hydraulic Power (Calculated)

39hp

Service Refill Capacities

Cooling System

3.7gal

Fuel Tank

27.7gal

Hydraulic Tank

10.3gal

Engine Crankcase

3gal

Hydraulic System

13.2gal

Chain Box – Each Side

2.3gal

Cab

Rops

ISO 3471:2008

Fops

ISO 3449:2005 Level I

Fops Level Ii

ISO 3449:2005 Level II